top of page
Oxyful 792GPH Frequency Variation Submersible

  • IDEAL - for aquarium ponds up to 780 gallons / flow rate: 792 gallon/hr

  • SUBMERSIBLE - capable of being fully submersed into water

  • SILENT - operates quietly allowing it to be discreet

  • RUST PREVENTION - ceramic shaft prevents rusting

  • LOW MAINTENANCE - easy to maintain and doesn't require any special tools to clean

   Comparing the power consumption of the CTP-Pond-Pump Series with other pond pumps, you will notice that the trend to save energy was correctly identified and implemented. Pond Pumps are always in continuous operation, every Watt savings is a relief for every budget.

The pump is really silent so noise will not be an issue. Pump is completely capable of being submersed into water. Pump uses ceramic shaft which prevents it from rusting. Can be used for both fresh water and salt water. Pump is very low maintenance and does not require and special tools to clean. Pond Pump 792 l/h with 10 Watt is one of the pumps with the highest efficiency on the pond market for its size.

Features

​

• Ideal for up to 780 gallon ponds
• Flow rate: 3000L/hr
• Pump power: 10W
• H-Max (Lift height): 6 feet(2m)
• The pump is really silent so noise will not be an issue
• Pump is completely capable of being submersed into water
• Pump uses ceramic shaft which prevents it from rusting
• Can be used for both fresh water and salt water
• Pump is very low maintenance and does not require any

   special tools to clean
• This pump is good for waterfalls, pond filtration systems, or

   any other pond application.
• Can be used submerged or inline (external)
• Safe for fish - no cooper, no oil
• Ceramic shaft - corrosion resistant in salt water
• Energy saving up to 60% with electronic frequency

   conversion technology

Oxyful 2113GPH Frequency Variation Submersible

  • IDEAL - for aquarium ponds up to 2070 gallons / flow rate: 2113 gallon/hr

  • SUBMERSIBLE - capable of being fully submersed into water

  • SILENT - operates quietly allowing it to be discreet

  • RUST PREVENTION - ceramic shaft prevents rusting

  • LOW MAINTENANCE - easy to maintain and doesn't require any special tools to clean

   Features

​

• This pump is good for waterfalls, pond filtration systems,

   or any other pond application.
• Can be used submerged or inline (external)
• Safe for fish - no cooper, no oil
• Ceramic shaft - corrosion resistant in salt water
• Allow large size of dirt particle up to 1/4" with spiral

   propeller design
• 3/4" - 1 1/4" Barbed fitting supplied
• Energy saving up to 60% with electronic frequency

   conversion technology

Specifications

​

• Max Flow Rate: 2113 GPH(8000L/H)
• H-Max (Lift height): 17 feet(5.6m)
• Voltage: 110V/ 60Hz.
• Power: 70 Watt
• Length of power cord (approx): 15 feet cable 1m
• Allowed dirt particle size: 1/4"
• Outlet: Fits 3/4", 1", 1-1/4" ID (inside diameter) tubing
• Overall dimensions: 6 1/2'' (L) x 4 1/2''(W) x 5''(H)

   Comparing the power consumption of the CTP-Pond-Pump Series with other pond pumps, you will notice that the trend to save energy was correctly identified and implemented. Pond Pumps are always in continuous operation, every Watt savings is a relief for every budget.

The pump is really silent so noise will not be an issue. Pump is completely capable of being submersed into water. Pump uses ceramic shaft which prevents it from rusting. Can be used for both fresh water and salt water. Pump is very low maintenance and does not require and special tools to clean. Pond Pump 8000 l/h with 70 Watt is one of the pumps with the highest efficiency on the pond market.

bottom of page